KNX 8-Way Push Switch+3-fold Switch Actuator


Cat. no.: UP038000
CHARACTERISTICS
● Push button and status indication
● Push button for operate dimmer manual
● Switching,blind,scene for push button
● Logic operation AND,OR,XOR, gate function
● Status response
● Forced operation and safety function
● Reaction to threshold functions
● Control of thermal valve drives
● Selection of preferred state after bus voltage failure and recovery
● Inversion of the outputs
● Staircase lighting functions with warning and adaptable staircase lighting time

  • Load wires for output
  • KNX/EIB bus connection
  • No using, reserved
  • Push button
  • Programming button and LED,red LED for assigning the physical address,
    green LED for device running normally
  • Manual operation button and LED
  • For screw to fix device
  • Operation voltage: 21~30V DC, via the EIB bus
  • Current consumption <24mA
  • Power consumption: Max.360mW
  • Un rated voltage: 230V AC (50/60 HZ)
  • In rated current: 10A
  • Max. leakage loss: 8W
  • Red LED and push button: For assigning the physical address
  • Green LED flashing: For display device running normally
  • Touch button and LED: For operation and status indication
  • Push button and LED: For operate dimmer and status indication
  • EIB/KNX: Bus connection terminal (black/red)
  • Terminal: For load
  • Temperature Operation -5°C ~45°C
  • Storage -25°C ~55°C
  • Transport -25°C ~70°C
Datasheet is available in PDF format. You can download it here.