KNX/IP Gateway
KNX/IP Gateway:
- Power Supply: 21~30V DC, via the EIB bus
- Current consumption <12mA
- Auxiliary power: 20~30V DC
- Connections: Bus connection terminal (black/red)
- Auxiliry connection terminal (grey/yellow)
- LAN: RJ45 socket for 10/100Base-T
- Green LED flashing: The device running indicator
- LAN/LINK LED ON: Network connection indicator
- LAN/LINK LED flashing: Network telegram traffic indicator
- EIB/LINK LED ON: Bus connection indicator
- EIB/LINK LED flashing: Bus telegram traffic indicator
- KNX interface between KNX installations and IP networks
- Configure, parameterize and commission the KNX installation
and bus monitor via the LAN using the ETS software
(ETS3 or later) - The IP address of the device can be fixed or can be received
from a DHCP server - Support the UDP telegram, and the port number 3671
- The factory default physical addresses are 15.15.255, and
the address can be modified directly via local interface settings
of ETS
- Power Supply: 21~30V DC, via the EIB bus
- Current consumption <12mA
- Auxiliary power: 20~30V DC
- Connections: Bus connection terminal (black/red)
- Auxiliry connection terminal (grey/yellow)
- LAN: RJ45 socket for 10/100Base-T
- Green LED flashing: The device running indicator
- LAN/LINK LED ON: Network connection indicator
- LAN/LINK LED flashing: Network telegram traffic indicator
- EIB/LINK LED ON: Bus connection indicator
- EIB/LINK LED flashing: Bus telegram traffic indicator
Datasheet is available in PDF format. You can download it
here.
